WHAT IS THE RECOMMENDED MEASURING DISTANCE USING UPRTEK HANDHELD SPECTROMETER?
It depends on users’application needs. Users can adjust the distance of measuring based on their requirements.
For example, when a designer sets up the internal lighting and finds out that the light intensity is insufficient in a specific area, the general practices are to increase the numbers of the lights or adjust the installation of height from above to below to make the best display of the whole area. In the same way, you can fix it reversely when lights emit too much intensities. Therefore, users can quantify the light source, get the illuminance value (Lux) with MK350 series handheld spectrometers as well as adjust the numbers and height of the fixtures based on their needs on the current lighting demands. MK350 handheld spectrometers are the best helper to detect the light quality and intensity changes which improve the lighting visual experiences and meet the requirements of the energy saving needs.
Please refer to the example below:
When you move the light source from the surface of a table to a far space, the strength of the illuminance is inversely proportional to the square of the distance from the source. Users need to consider this factor in lighting design.
Lux=candela (cd)/squared distance
If the candela (cd) is constant, the illuminace (lux) is inversely proportional to the square of the distance from the source.
When the distance is 2, illuminance is quarter of it. When the distance is 3, illuminance is one ninth of it.
The following is an example sharing of the MK350S Premium-Spatial lighting research device. As can obviously be seen, the Lux intensity is different between the device which is displayed on the table surface as figure A and parallel to the table as figure B because the device’s height plus table’s thickness is about 30 cm. In this situation, the measuring position might affect the result in the MK350S Premium handheld spectrometer which receives the proper light intensity. Thus, the result will be a difference of nearly 300 lux.
The illuminance increases and decreases significantly regarding the increase and decrease of distance. Therefore, users can refer to the lighting regulations in public places.
MK350S Premium is a Handheld Spectrometer with Muli-Functions in itself. It's not only a Spectrometer, but also can be a Quantum PAR Meter, Blue light Detector and Oscilloscope. The
MK350N Premium is a Spectrum Analyzer, LED Meter and Flicker Meter for LED manufacture. Embedded with spectral technology and optimize the LUX measuring range. Overall, the measuring
UPRtek Compact MK350D is the pocket-Sized spectrometer in the world and released in 2014. It is only 70g and easy to carry. Measurement light units are more than 27, such as CCT, LUX, CRI,
CV600 - All purpose Professional Cinematic and Photographic Light meter. It is not only a Light meter, but also a Color meter, Cine meter and Exposure meter a quicker, more efficient measurements for
PG100N Handheld Spectral PAR meter is focused on achieving the demands of agricultural field. It shows its own advantages of measuring functions ,such as spectrum, PPFD and PFD so that users
Advanced MK350S the 1st handheld Spectrometer cross to muti-industrials. It had more than 40 light measurement units which are CCT, LUX, CRI, CIE1976, CIE1931,PPF, CQS, Duv, LambdaP, S/P
MK350N Spectrometer is the first portable LED Meter which can be used without a computer for evaluation of artificial light sources, such as LED, OLED and others. In addition, it can easily measure
MK350N PLUS is the LED meter for LED Manufacturer. It included more than 40 light measurement units such as CCT, CRI, CIE1931/1976, LUX, TLCI and others. Assist you to discover new busines