Photosynthesis: What, Where, How and Why?

by | Oct 17, 2023 | Blogs, Grow Lights | 0 comments

Introduction

What is photosynthesis?  For many, it’s something we’ve learned or heard about, but the details have escaped us over the years.  So, we thought it might be helpful to review the salient points and terminology of this amazing process for you.

Some biochemistry is inevitable, but we’ll keep it simple and manageable. Here are the topics:

  • What is Photosynthesis?
  • Where does Photosynthesis happen?
  • How does Photosynthesis work?
  • Why is Photosynthesis important?

By the end of this article, we hope you’ll be able to summarize photosynthesis like a pro.

 

MK350N Premium product image

Fig 1

What Is Photosynthesis?

As you may know, Photosynthesis is a process by which plants use energy from light to produce “sugars”.   

The plant eventually uses these sugars as energy, needed for many metabolic purposes, like stem growth, leaf production, flowering, and fruiting.

 

Indoor Horticulture

Fig 2

Where does Photosynthesis take place?

For green plants, Photosynthesis will occur in the “green” parts of the plant, namely the leaves.

Please take a look at figure 4.

 

  1. Leaves are made of plant cells encased by an outer boundary.
  2. Within the leaf cell are smaller bean-like objects called Chloroplasts.
  3. Within the Chloroplast are stacked pancake-like objects called Thylakoids.
  4. Thylakoids have an outer membrane – within this membrane, the first part of Photosynthesis occurs.

Fig 3  (Albert Melu on Unsplash)

Fig 4 – Where photosynthesis takes place.

How does Photosynthesis work?

You can think of Photosynthesis as a small factory that makes sugar. A factory needs inputs like energy and materials.

In our photosynthesis factory, a leaf uses energy from light, H2O (water), and C02 (Carbon Dioxide). 

And the outputs are sugar and Oxygen.  Sugar goes back into the plant for metabolic purposes.  The Oxygen is expelled as a vital waste product that becomes the air we breathe.

Fig 5 – Photosynthesis is like a factory

Fig 6 – Photosynthesis Inputs and Outputs

Tale of two factories

Actually, two factories make up Photosynthesis – Light Reactions and Calvin Cycle.

We will first cover the Light Reactions in the Thylakoid membrane.  The goal of this factory is to harness light energy into a more usable form.

 

Fig 7 – The two factories of Photosynthesis.

Light Reactions Factory – INPUTS

In Figure 9, You can see the light coming into our system.  You can also see Water input into the system.  And you can see Oxygen exiting the system.

Fig 8 – The Thylakoid

Fig 9 – Light Reactions Inputs

Light Reactions – Accumulating Energy

In figure 11 (red circles), energy from light is converted to H+ and e- in a process called Electron Transport.  They are the energies or electricity that are accumulated throughout the processing.

Also in Figure 11 (blue circles), are the outputs from the process is ATP and NADPH.  They are temporary stores of energy (batteries) used for the second stage of photosynthesis.  So, this first part of Photosynthesis aims to build up energy stores to be used in the 2nd factory.

Fig 10 – The Thylakoid

Fig 11 – Light Reactions – Energy accumulation

 

The 2nd factory of Photosynthesis – The Calvin Cycle

The 2nd factory or stage is where we synthesize  sugar – it is called the Calvin Cycle, named after the renowned biochemist Melvin Calvin.

In Figure 13, you can see the ATP and NADPH from the Light Reaction process used as input into the Calvin Cycle (letters E and D).

Also note that Carbon Dioxide is also used in the Calvin Cycle (letter F). The final product is the sugar 3 phosphoglycerate (letter G).

Note that the Calvin Cycle occurs immediately outside the Thylakoid in the spaces of the Chloroplast stroma.

Fig 12 – Melvin Calvin

Fig 13 – Tale of two factories – Calvin cycle. (2023, September 5). In Wikipedia. https://en.wikipedia.org/wiki/Calvin_cycle

What about Chlorophyll?

We still need to talk about Chlorophyll, the essential molecule responsible for absorbing light energy.

Chlorophyll is a pigment molecule, so called because it reflects a color making leaves look green.  The other colors are absorbed, particularly in the blue and red areas.

Fig 14 – Chlorophyll Molecule

Fig 15 – Grow Lights

If we go back to the Light Reaction production line in the Thylakoid membrane, you will notice a PSII and a PSI module.  This is where Chlorophyll resides.

PSII and PSI contain two types of chlorophyll, namely a and b.   Both types of chlorophyll absorb blue and red light, and that is why grow lights are typically blue and red.

However, plants are most sensitive to red light.  PSII is most efficient in absorbing red light at 680nm, and PSI is most efficient at absorbing light red light at 700nm, which can be referred to as far-red light.  It  mostly involves chlorphyll-a.

Fig 16 – Chlorophyll in PSII and PSI

What is Light Energy?

Light contains energy that powers all Photosynthetic activity.  When you think about light energy, you can look at it from two perspectives – light as particles and light as waves – it is the dual nature of light.

 

Fig 17 – Spectrum from Spectrometer

Light as particles

When you think about light as a particle, you can imagine droplets of light falling on a leaf.  These droplets are called photons.

Fig 20 – Light as particles

If you increase the brightness or intensity of the light, the number of photons increase, and the energy increases.

Fig 18 – Brightness or Intensity

Light as waves

When you think about light as waves, you should think about colors. And we refer to color in terms of wavelengths.

Higher frequency wavelengths tend toward the blue spectrum and have more energy, while lower frequency wavelengths tend toward the red and have less energy.

Fig 21 – Color, wavelength and energy

A Photon has an associated wavelength

Each photon of light will have an associated wavelength.  So, you will have blue photons, red photons, green photons, yellow photons etc.  Blue photons will have more energy than red photons.

PSII will absorb blue photons as a very high energy source to produce energy-packed NADPH and ATP.  Most leaves above the canopy receive adequate amounts of blue light for photosynthesis.

However, leaves underneath the canopy can still participate in photosynthesis because some blue and red light is still penetrating the leaves.  In fact, the Chlorophyll-a color range is wider than Chlorophyll-b, to allow for as much light absorption in the shade as possible.

Fig 22 – Photons and wavelengths

Using a Spectral PAR Meter to measure light energy.

You can use a Spectral PAR meter to see the light energy from the grow lights or the sun.

In Figure 23, you can see a spectral diagram that shows the wavelengths of photons and their intensities.

We see an abundance of high-energy blue photons that PSII can use – however, the blue color is not aligned with optimal chlorophyll absorption.  You can tell by the spectrum’s shape, that it is an LED grow light –  if it is a “Dynamic” LED light, colors must be adjusted.

 

LED light color and Photosynthesis alignment

Fig 23 – Photons and wavelengths

Summary

Photosynthesis is a process plants use to make sugar, a vital element used for many metabolic functions.  This process is buried deep in the plant’s cell, in a place called the Thylakoid membrane.  It is like a factory production line with inputs (Light, Water, CO2) and outputs (Oxygen and Sugar).

There are two stages to photosynthesis – Light Reaction and Calvin Cycle – the Light Reaction stage harnesses energy from light and transforms it into a more usable form (ATP and NADPH).

The Calvin cycle uses ATP and NADPH to synthesize the sugar for later metabolic processes such as plant growth, flowering, and fruiting.

Photosynthesis is one of the marvels of nature, and having a good grasp of the basics gives farmers the confidence to tweak the parameters and improve farming productivity.

But Photosynthesis is only half the grow-light story – In the next post, we will show how plants use light to grow, flower, and fruit.

 

 

Fig 24 – Photosynthesis

PG200N Spectral PAR Meter

Spectral PAR  measurement allow farmers and researchers the advantages of expert lighting in tweaking the color parameters to improve quality, timing and quantity of their products.

PG200N Spectral PAR Meter

Hot Product

UPRtek MA Series Imaging Colorimeter-Front

MA Series Imaging Colorimeter

Next generation of imaging colorimeter for wide range of measuring for various Display in a rapid and highly precision for display imaging measurements.

MK350S Premium product image

MK350S Premium

MK350S Premium is a full-featured Handheld Spectrometer used by lighting professionals with wide ranging projects and lighting challenges.

MK350N Premium product image

MK350N Premium

The MK350N Premium is our popular mid-range spectrometer, made for professionals who want top spectrometer performance without the need for specialized niche features (e.g. Manufacturing , PAR meter, Lighting Design).

MK350D product image

MK350D Compact

The MK350D Compact spectrometer is for users who just need a simple product with basic measurements essentials. And yet, the measurement needs to be precise and up to the scrutiny of global standards.

PG200 Spectral PAR Meter Product Image

PG200N Spectral PAR METER

The PG200N is a Spectral PAR meter used to measure the quantity and quality of light for a new generation of indoor farmers who use artificial lighting as a substitute or complement to sunlight.

CV600 Product Image

CV600 Cinema Spectral Meter

The CV600 spectral color meter is for cinema and stage lighting professionals, providing tools to help assess/adjust color fidelity, improve color rendering, purchase better lights, recall lighting setup from previous performances and make better overall choices about lighting with the numbers.

UV100n front view

UV100N Spectral UV Meter

The UV100 Spectral UV meter meaures ultraviolet light for modern-day applictions. Industrial curing, medical sterilization and UV bulb production using UV light require more versatile, visual and accurate spectral measurement devices to make sure UV light is used efficiently and optimally for light-critical instrumentation and products.

MK330T product image

MK550T Handheld Spectroradiometer

The MK550T Handheld Spectroradiometer is used by Display Panel manufacturers as a cost-effective, lab-level device that measures panel performance.

MD100N product image

MD100N Desktop Spectroradiometer

The MD100N is a spectroradiometer that is cost-effective, with fast measurement times, and a focus on Laboratory-level precision. It can be used by manufacturers, OEM/ODM companies of any size and allows much more flexibility and versatility in Quality Control.

uSpectrum PC Software product image

uSpectrum PC Software

With the uSpectrum PC Software, you can connect your UPRtek device by USB cable to a PC or laptop, for full screen views and keyboard operations.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Handbook Series

The Flicker Handbook

Everything thing you need to know about Flicker, an insidious, potentially serious lighting artifact impacting visual safety for public places like hospitals, offices, libraries, and more...

▸ Get it!

About UPRtek

United Power Research and Technology

UPRtek (est. 2010) is a manufacturer of portable, high-precision light measurement instruments; Handheld Spectrometers, PAR meters, Spectroradiometers, Light Calibration Solutions.

UPRtek HQ, R&D and manufacturing are all based out of Taiwan, with Worldwide representation through our certified Global Resellers.

▸ Read on

Category